Advertisement
Assembly
5
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
• Repeat assembly steps 3 - 5 to attach the other ends of the
frame tubes to the frame on the other side of the base.
M6 x 1
5
/
" Screw - 4
8
Frame
Lower Hole
6
• Position the base wires around the base so that the ends
point upward and are against the lower holes in a frame.
• Place a spring onto an M6 x 1
• Insert the M6 x 1
/
" screw with spring through a base wire
5
8
and into the frame.
Spring - 4
Spring
Base Wire
/
" screw.
5
8
7
• Fit an M6 lock nut (with the
rounded side toward the
fabric) into each lower, hexag-
onal opening on the back
of the frame.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
• Repeat this procedure to attach the other ends of the
base wires to the frame on the other side of the base.
Base
Wire
5
Frame
Rounded Side
M6 Lock Nut - 4
Advertisement
