Operating Instructions; How To Get Started - Fisher & Paykel Ecosmart Use & Care Manual

2

OPERATING INSTRUCTIONS

HOW TO GET STARTED

POWER
BLEACH
LOADING
DETERGENT
Turn your Ecosmart on by pressing the POWER
button.
Remove the fabric softener dispenser.
If you wish to use bleach:
• Use half the recommended dose of bleach.
• Dilute bleach and pour carefully down the inner
surface of the agitator stem, in-line with the fins.
(Refer to Bleach page 13).
• Select the Softener Rinse Option.This will
ensure that any residual bleach is well cleared
out of your washer.
Place the load evenly around the agitator. (Refer to
Sorting and Loading page 12).
• Follow the instructions on the detergent package.
• Use the mark on the agitator, nearest to the top
of the clothes, as a guide to the correct amount of
detergent to use.
• Pour the detergent down the center of the
agitator stem.
• Replace the fabric softener dispenser, as this stops
articles falling down the center of the agitator.