Table of Contents
Advertisement
2
OPERATING INSTRUCTIONS
HOW TO GET STARTED
POWER
BLEACH
LOADING
DETERGENT
Turn your ecosmart on by pressing the POWER
button.
Remove the fabric softener dispenser.
• Use half the recommended dose of bleach.
• Dilute bleach and pour carefully down the inner
surface of the agitator stem, in-line with the fins.
(Refer to Bleach page 13)
Place the load evenly around the agitator. (Refer to
Sorting and Loading page 12)
• Use the mark on the agitator, nearest to the top
of the clothes, as a guide to the correct amount of
detergent to use.
• Pour the detergent down the center of the
agitator stem.
• Replace the fabric softener dispenser, as this stops
small articles falling down the center of the agitator.
Advertisement
Table of Contents
