Pentax OPTIO WS80 Operating Manual page 80

Message • Description
The image or sound file you are trying to delete is protected
Protected
(p.156).
Displayed when you try to switch to _ mode while an
Data being recorded image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
Data being processed to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image to be
processed Displayed when there are no images or sound files.
This image/sound Displayed for files that cannot be processed.
cannot be processed
No card in the camera Displayed when no SD Memory Card is inserted.
The built-in memory is Displayed when there is insufficient built-in memory to
not enough to copy perform copying.
images/sounds
Cannot process
correctly Displayed when Red-eye Compensation processing fails.
Display image/sound Displayed when the camera enters the built-in memory
from built-in memory display.
Not enough battery Appears during pixel mapping if the battery level is
power remaining to insufficient. Replace the battery with a fully charged one or
activate Pixel Mapping use an AC adaptor kit K-AC88 (optional). (p.40)