Connect your c amera tothe Windows PC using t heprovided USB cable
(I-USB7).
1
Turn your Windows
PC on.
2
Turn your camera off.
_
Connect your camera to the Windows
PC using the USB
cable.
Connect
the terminal of the USB cable with the arrow mark <:_ facing
the front side of the camera.
4
Turn your camera on.
The "Device Detector"
screen appears.
If the "Device
Detector" screen does not appear, follow the steps in
"When the "Device
Detector"
screen does not appear"
(p.222).
The se!f-timer lamp blinks While the camera is connected to a Windows
PC.