Pentax OPTIO WS80 Operating Manual page 166

In order to better serve you, we request that you complete the product
registration.
If your computer is connected to the
Internet, please click [Product
Registration] on the setup screen after the
language selection screen is displayed.
The world map screen shown on the right
for Internet Product Registration is
displayed. Click the displayed country or
region and then follow the instructions to
register your product.
Only customers in countries and regions displayed on the software
installation screen can register their products on the Internet Product
Registration.
Set the device to which the camera is connected with the USB cable.
Make sure toset the USB connection mode before connecting your
camera to the computer. You cannot perform the following setting if the
camera is already connected to your computer with the USB cable.
t' Turn your camera on.
,2 Press the MENU button in I-_ mode.
The [_ Setting] menu appears.
When you press the MENU button in I_ mode, press the four-way
controller ( • ) once.
3 Use the four-way controller (• •) to select [USB
Connection].
#
Press the four-way controller (b).
A pull-down menu appears.