Pentax OPTIO WS80 Operating Manual page 157

5
#
,7 Use the four-way controller (• •) to select [Time].
8 Press the four-way controller (_).
9 Use the four-way controller (• •)
to change the hour.
Use the four-way controller ( • • ) to select [Off], [Once]
or [Everyday].
Once The alarm rings only once, at the set time.
Everyday The alarm rings every day, at the set time.
To cancel the set alarm, select [Off].
Press the OK button.
14:25
Alarm Once
Settings complete
/ _Cance]
18 Change the minutes in the same way as in Steps 8 to 9.
11 Press the four-way controller (_).
1.2 Press the four-way controller (•) to select [Settings
complete].
Press the OK button.
After the message [Alarm is set] appears, the camera turns off.
When the set time is reached, the camera turns on with the Clock
mode screen displayed and the alarm will ring. The alarm will stop
ringing when a button is pressed or after one minute elapses. The
camera will turn off 10 seconds after the alarm is stopped.
18
' The alarm will not ring if the camera is on when the set time is reached.
; The alarm Will not ring during interval shootingl
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiii