Page 1
C.G.A.) listed gas conversion less of furnace orientation. is required to convert fumace for use with propane gas. model LIMITED The PG9MAA is backed by a Life- PG9MAA meets Catifomia Air Qual- WARRANTY: time Warranty heat Management District...
Page 3
FRONT VIEW SIDE VIEW A93026 As an ENERGY STAR® MEETS DOE RESIDENTIAL CONSERVATION SERVICES partner, Payne Heating & PROGRAM STANDARDS. Cooling has determined that this product meets the ENERGY STAR® guidelines Before purchasing this appliance, read important for energy efficiency.
Required for installation on combustible floors when no coil box is used, or when any coil box other than a Payne CD5, CK5 or KCAKC cased coil is used. 11-1 For direct vent applications only. N/A--Not Applicable. Unit is not allowed in this installation application.
Page 5
Required for installation on combustible floors when no coil box is used, or when any coil box other than a Payne CD5, CK5 or KCAKC cased coi! is used. 1-11- For direct vent applications only. N/A--Not Applicable. Unit is not allowed in this installation application.
Page 6
COMBUSTION-AIR AND VENT PIPING FOR DIRECT VENT (2 PIPE) APPLICATIONS MAXIMUM ALLOWABLE PIPE LENGTH (FT) PIPE ALTITUDE NUMBER OF 90 ° ELBOWS TERMINATION DIAMETER ABOVE UNIT SIZE TYPE (IN.)* LEVEL (FT) 024040 I-1/2 2 Pipe or 2-in. Concentric 036040 I-1/2 024060 036060 2 Pipe or 2-in.
Page 7
MAXIMUM ALLOWABLE PIPE LENGTH (FT) Continued ALTITUDE PIPE NUMBER OF 90 ° ELBOWS ABOVE SEA DIAMETER TERMINATION UNIT SIZE LEVEL (FT) TYPE (IN.)* 1-I/2 024040 2 Pipe or 2-in. Concentric 036040 024060 1-I/2 036060 2 Pipe or 2-in. Concentric 048060 036080 048080 2 Pipe or 2-in.
Page 8
MAXIMUM ALLOWABLE PIPE LENGTH (FT) Continued PIPE ALTITUDE NUMBER OF 90 ° ELBOWS TERMINATION DIAMETER ABOVE UNIT SIZE TYPE (IN.)* LEVEL (FT) I-1/2 024040 2 Pipe or 2-In. Concentric 036040 024060 I-1/2 036060 2 Pipe or 2-In. Concentric 048060 036080 048080 2 Pipe or 2-In.
Page 9
MAXIMUM ALLOWABLE EXPOSED VENT PIPE LENGTH (FT) WITHOUT INSULATION IN WINTER DESIGN TEMPERATURE AMBIENT FOR DIRECT-VENT APPLICATIONS* WINTER DESIGN MAXIMUM PIPE WITH 3/8-1N. OR UNIT TEMPERATURE DIAMETER WITHOUT THICKER INSULATIONt SIZE (°F) (IN.) INSULATION I-I/2 I-I/2 I-I/2 2-I/2 2-I/2 2-I/2 2-I/2 2-I/2 2-I/2...
Page 10
VENT PIPING FOR NON-DIRECT VENT (1 PIPE) APPLICATIONS MAXIMUM ALLOWABLE VENT PIPE LENGTH (FT) VENT PIPE ALTITUDE NUMBER OF 90 ° ELBOWS DIAMETER ABOVE UNIT SIZE (IN.)* LEVEL (FT) 024040 1-1/2 036040 1-1/2 024060 036060 048060 1-1/2 036080 048080 0 to 2000 060080 2-1/2 048100...
Page 11
MAXIMUM ALLOWABLE VENT PIPE LENGTH (FT) Continued VENT PIPE ALTITUDE NUMBER OF 90 ° ELBOWS DIAMETER ABOVE UNIT SIZE (IN.)* LEVEL (FT) I-I/2 024040 036040 024060 I-I/2 036060 048060 036080 5001 to 60001- 048080 060080 2-I/2 2-I/2 048100 060100 31-no disk 060120 41-no disk I-I/2...
Page 13
ACCESSORIES (Continued) SIDE FILTER RACK* A80199 *Accepts one 16 x 25 x 1 in. filter. ACCESSORY DOWNFLOW SUBBASE 114"TYP OPENING FACTORY-SUPPLIED. FIELD-INSTALLED INSULATION A88207 A97427 Disassembled Assembled FURNACE HOLE FLOOR OPENING PLENUM OPENING* CASING FOR WIDTH WIDTH FURNACE IN DOWNFLOW APPLICATION ADJUSTMENT Furnace with or without CD5, CK5 Coil 17-I/2...
Page 14
CLEARANCE T OCOMBUSTIBLES • This forced air fumace is equipped for use with naturaU gas at amtitudes 0 - 10,000 ft (0 m3,050m), except t40 size furnaces are onUy approved for aUtitudes 0 - 7,000 ft. (0 _ 2,135m). An accessory kit, suppJ_ed by the manufacturer, shah be used to convert toprepene gas use or may be required for some naturaU gas appUicetions.
Page 15
AIR DELIVERyICFM (With Filter)* EXTERNAL STATIC PRESSURE (In. wc) RETURN-AIR UNIT SIZE SUPPLY SPEED 1 side High 1075 I040 024040 Med-Low bottom High 1470 I4 I5 I400 1285 1215 1120 1 side Med-High 1315 I280 I235 1180 1115 I035 036040 Med-Low 1 I25 11 t0...