Remote Playback - Onkyo HT-R990 Instruction Manual

Using Remote Playback
1 Start Windows Media Player 12.
To enable remote playback, you must first configure
Windows Media Player 12.
2 Press NET.
The "NET" screen appears. The NET indicator
lights. If it flashes, verfly the network connection.
3
Use ll¥1<ll,,-
to select "dlna", and press
ENTER.
A list of media server appears.
• Remote playback cannot be used while the music files of
another media server are being played. You must stop their
playback first.
4 On Windows Media Player 12, right-click on a
music file.
The right-click menu appears. For selecting another
media server, select the desired media server from the
"Other Libraries" menu on Windows Media Player
12.
5
6
Select the AV receiver from the right-click menu.
The "Play to" window appears and playback on the
product starts. Operations during remote playback
can be made from the "Play to" window of Windows
7 on your personal computer. During remote
playback, operations (such as Playback, Pause, Fast
Forward, Fast Rewind, Previous, Next, Repeat,
Random) cannot be made.
Adjusting the Volume.
You can adjust the volume by adjusting the volume
bar in the "Remote playback" window. The default
maximum volume level is 82 (0dB). If you wish to
change this, enter the value from the Web Setup in
your browser.
The volume value of the remote window and the
volume value of the AV receiver may not always
match.
Adjustments you make to the volume in the AV
receiver will not be reflected in the "Remote
playback" window.
Using the Tuner
With the built-in tuner you can enjoy AM and FM radio
stations. You can store your favorite stations as presets for
quick selection.
You can also change the frequency steps (@ page 54).
1
Press TUNER
to select either "AM" or "FM".
In this example, FM has been selected.
Each time you press TUNER,
the radio band changes
between AM and FM.
Band Frequency
I .I
F"";."_ " .2:° ":_ _:::." _'d. LJ..._. . .........
(Actual display depends on the country.)
Tuning into Radio Stations
m Auto tuning mode
1
2
Press TUNING MODE so that the AUTO indicator
lights on the display.
Press TUNING A/Y.
Searching stops when a station is found.
When tuned into a station, the TUNED indicator
lights. When tuned into a stereo FM station, the FM
STEREO indicator lights on the display, as shown.
_TUNED 4
IAUTO
FN 8 2',, 5 NHz ............. ]_I:I--
FM STEREO
• Tuning into weak FM stereo stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. [n this case, switch to
manual tuning mode and listen to the station in mono.
ff Manualtuning mode
In manualtuning mode, FM stations willbein mono.
1
2
Press TUNING MODE
so that the AUTO indicator
goes off on the display.
Press and hold TUNING &/¥.
The frequency stops changing when you release the
button.
Press the buttons repeatedly to change the frequency
one step at a time.
En
27