Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons.
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
To identify small parts, see page 5.
in addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
(_:::b=====_
one rubber mallet
_
Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.
.
With the help of a second person, place some of
the packing materials (not shown) under the rear
of the Frame (1). Have the second person hold
the Frame to prevent it from tipping
while you
complete this step.
Attach the Rear Stabilizer (2) to the Frame (1)
with two M10 x 122mm Button Screws (104) and
two M10 Split Washers (105).
Remove the packing materials from under the
rear of the Frame (1).
104
105
.
Press the Cover Mounts (106) on the underside
of the Rear Stabilizer Cover (15) into the Rear
Stabilizer (2).
2
15
2
6
Hide quick links:
Advertisement
Table of Contents
