Advertisement
HOW TO USE THE MANUAL MODE
1.
insert the key into the console.
See HOW TO TURN ON THE POWER on page
16. Note: it may take a minute for the console to
be ready for use.
2.
SeJect the main menu.
When you turn
on the power,
the main menu
should appear
after the
console boots
up. Touch the
home button in
the lower-left
corner of the screen (not shown here) to return to
the main menu at any time.
CIIIIIIII_]
_fi [iiiiiiiiiiiii_1
r el CIIIII_.I
CIIIIII_]
i _)
MAP
;£AI_
CO_E
TRACK
SaAGOAL
VIDEO
LOSEW_I;aT
3.
Start the walking
beJt and adjust the speed.
Touch the Start button on the screen or press the
Start button on the console to start the walking belt.
You can also press the Manual Control button on
the console, and then touch the Resume button
on the screen. The walking belt will begin to move
at 1 mph. As you exercise, change the speed of
the walking belt as desired by pressing the Speed
increase and decrease buttons. Each time you
press one of the buttons, the speed setting will
change by 0.1 mph; if you hold down the button,
the speed setting will change in increments of 0.5
mph.
If you press one of the numbered 1 Step Speed
buttons, the walking belt will gradually change
speed until it reaches the selected speed setting.
To select a speed setting that includes a decimal--
such as 3.5 mph--press
two numbered buttons in
succession. For example, to select a speed setting
of 3.5 mph, press the 3 button and then immedi-
ately press the 5 button. Note: This will not function
if the console is set to metric units.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button.
4.
Change the incline of the treadmill
as desired.
To change the incline of the treadmill, press the
incline increase and decrease buttons or one
of the numbered 1 Step Incline/Decline buttons.
Each time you press one of the buttons, the incline
will gradually change until it reaches the selected
incline setting.
Note: The first time you adjust the incline, you must
first calibrate the incline system (see step 4 on
page 22).
5.
Monitor your progress with the displays.
The console
offers sev-
eral display
modes. The
display mode
that you select
will determine
which workout
_
/_3o_3o_ ..........
_!.1 o o.o_/,_
information is shown. To select the desired display
mode, simply flick or slide the screen. You can also
view additional information by touching the red
boxes on the screen.
As you walk or run on the treadmill, the screen can
show the following workout information:
• The incline level of the treadmill
• The elapsed time
• The time left (Note: The manual mode does not
have a time left countdown.)
• The approximate number of calories you have
burned
• The approximate number of calories you are
burning per hour
• The distance that you have walked or run
• The number of vertical feet you have climbed
• The speed of the walking belt
• Atrack representing 1/4 mile (400 m)
• Your pace in minutes per mile
• Your current lap number
• Your heart rate (see step 6)
16
Advertisement
