Advertisement
.
Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
step 8 is completed.
Orient the Storage Latch (58) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (58)
to the Upright (79) with a 3/8" x 2" Bolt (6) and a
3/8" Nut (7).
Latch
Knob
58
_arge
Barrel
.
Attach the upper end of the Storage Latch (58)
to the Frame (55) with a 3/8" x 1 3/4" Bolt (8)
and a 3/8" Nut (7). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL
FOR USE on page 25).
.
Make sure that all parts are properly tightened
before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see page 29).
10
Advertisement
