How To Fold And Move The Treadmill - NordicTrack Viewpoint 3000 NTL11806.0 User Manual

Table of Contents

Advertisement

HOW TO FOLD AND MOVE THE TREADMILL
NOW TO FOLD THE TREADMILL FOR STORAGE
Before folding
the treadmill,
adjust the incline to the
lowest position, if this is not done, you may permanently
damage the treadmill.
Remove the key and unplug the
power cord. CAUTION: You must be able to safely lift 45
pounds (20 kg) to raise, lower, or move the treadmill.
1. Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the pos-
sibility
of injury, do not lift the treadmill
by the plastic
foot rails. To raise the frame, bend your legs, keep
your back straight, and lift with your legs rather than
your back. Raise the frame about halfway to the vertical
position.
2. Raise the frame until the latch knob locks into the storage
position. Make sure that the latch knob is locked in the
storage position.
To protect the floor or carpet from damage, place a
mat under the treadmill.
Keep the treadmill
out of di-
rect sunlight. Do not leave the treadmill
in the storage
position
in temperatures
above 85 ° Fahrenheit.
NOW TO MOVE THE TREADMILL
Before moving the treadmill, convert it to the storage posi-
tion as described above. Make sure that the latch knob is
locked in the storage position.
1. Hold the handrails and place one foot against one of the
wheels.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill
without
tipping
it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill.
Do not attempt to move the treadmill
over
an uneven
surface.
3. Place one foot against a wheel, and carefully lower the
treadmill until it is resting in the storage position.
Frame
Wheel
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viewpoint 3000Ntl11806.0

Table of Contents