Assembly - NordicTrack AudioStrider 990 PRO NTEL09109.0 User Manual

ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
in addition to the included tool(s), assembly requires a Phillips screwdriver q_L_====_, an adjustable
wrench _, and a rubber mallet :zzz:zz:z_ •
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware
kit, check to see if it has been preassembled.
M6 Washer M8 Split
(112)-4 Washer (103)-4
M4 x 16mm
Screw (106)-8
[
M8 Washer
(95)-14
M6 x 50mm
Patch Screw (62)-4
Wave Washer
(118)-2
M8 x 16mm Patch
Screw (102)-16
M8 x 25mm Patch
Screw (121 )-2
M8 x 44mm Patch
Screw (55)-6
M10 x 95mm Patch Screw (100)-4
5