Setting The Mode/Function; Setting The Fan/Ventilation Speed; Setting The Timer; Sleep Mode - NewAir AC-12000E Owner's Manual

I k0045 I
Setting the Mode/Function:
1. Press the MODE button to select the desired mode (cooling, fan or heating).
mode is only available on the AC-12000H.
2. The selected mode's indicator light will turn on.
Heating
Setting the Temperature:
1. Press the "Up" or "Down" button to change the set temperature.
2. The display window will indicate the set temperature. If no temperature is set, the
display will show the ambient room temperature.
3. Please note that the preset temperature for cooling is 75 o F for cooling and 68 o F for
heating.
Setting the FanNentilation Speed:
Press the SPEED button to select the desired fan speed (high or low). The appropriate
indicator light (high or low) will turn on accordingly.
Setting the Timer:
1. Press TIMER button to set the desired number of operating hours (from 1 to 24 hours).
When the set time has been reached, the machine will turn off automatically. The
display window will show the number of hours being set as you press the TIMER button.
If the TIMER is not set, the unit will work continuously.
2. By pressing the timer but without selecting any other modes or settings, you can set the
number of hours to be delayed before the unit turns on. For example, if you set the
timer to "2," the unit will automatically turn on after 2 hours.
Sleep Mode:
1. When in cooling mode, press the SLEEP button. The set temperature will increase1 ° F
on the first hour, another 1° F on the second hour, and then maintain that temperature.
2. When in heating mode, press the SLEEP button. The set temperature will decrease 1°
F on the 1st hour, another 1° F on the second hour, and then maintain that temperature.
3. In sleep mode, the fan will automatically be set to low. By pressing the SLEEP button
again, the set temperature and fan speed will revert back to previous settings.
4. The unit will shut down automatically after it has been in sleep mode for 12 hours.
5. Sleep mode will not work when the unit is in fan, dehumidification or auto mode. It will
only work in cooling or heating mode.