Front-To-Back Leveling - Craftsman PGT9500 107.289850 Quick Setup Manual

FRONT-to-BACK LEVELING
important: Side-to-side leveling must be
performed first.
11.
12.
Arrange the blades so they face front to back.
Using a measuring tool measure:
(A) - the distance from the ground to the rear
tip of one of the back blades.
(B) - the distance from the ground to the front
tip of the center blade. This should be
114"(6 ram) higher than measurement
(A).
@
15/16
13. if adjustment
is necessary,
to RAISE the front of deck turn Iocknuts (C)
clockwise (viewed from rear of deck).
Locknuts must be turned evenly on both sides
to keep deck level (Side-to-Side).
Tighten Iocknuts (D) SECURELY against
bracket. Recheck measurement (B).
if adjustment is necessary,
to LOWER the front of deck turn Iocknuts (D)
counterclockwise (viewed from rear of deck).
Locknuts must be turned evenly on both sides
to keep deck level (Side-to-Side).
Tighten Iocknuts (C) SECURELY against
bracket. Recheck measurement (B).
\
C
©
D
5