Maintenance - Fisher & Paykel Aerotech OD302 User Manual

Maintenance

How to change the oven light bulbs
The oven is illuminated by three 12 volt/20 watt halogen bulbs. These have a very long life,
but if you should need to replace one, follow these steps:
Turn the oven off and allow it to cool.
1
Take out the shelves and use a small flat head screwdriver to twist and lift the retainer clip at
2
the top of the glass light cover. The clip pivots counter-clockwise (see the diagrams below).
Carefully lift the glass cover out of the lower support and pull out the faulty bulb.
3
Holding the replacement bulb in a soft cloth or tissue (touching the bulb will reduce its life
4
span), insert the new bulb. The two pins are vertically orientated.
Reposition the glass cover and twist the top clip back in place. The procedure is the same for
5
the light in the roof of the oven cavity.
retainer clip
sockets for
the pins
plate glass cover
pins
replacement bulb
41