Table of Contents
Advertisement
34
Other Hookups
(cont'd)
With a Converter/Descrambler
Box
Cable
Converter
Box
Cable
Input
With this connection, you can record and view
any channel, including scrambled channels.
However, channel selections must be made at
the cable converter box. This means that:
_
Channels
cannot
be changed
using the
VCR remote
control.
You must select
channels
at the cable converter
box,
Timer recordings are programmed differ-
ently than shown on pages 20 - 21.
• You can only program a timer recording
for one channel at a time.
• When you are prompted to enter the
channel you want to record, select chan-
nel 3 or 4 (whichever is the output
channel of your cable converter box).
• Set your cable converter box to the
channel you want to record.
• Leave the cable converter box on while
you are recording.
You cannot view a channel
other than the
one you are recording
(the instructions
on
page 17 do not work with this hookup).
;
You cannot
program
channels
with this
hookup
(as discussed
on pages 7 and 22).
Jack
VHF/UHF
Combination
Antenna Jack
Recording
and Viewing a Scrambled
or Unscrambled
Channel
With the VCR on and in VCR position, use the CHANNEL
(Up/Down) buttons to set the VCR to the output channel of
the cable converter box (channel 3 or 4).
Set the TV to the same channel
to which you set the VCR.
Select the channel you want to record at the cable converter
box.
Watching TV With the VCR Off
Use the TV channel
selector
to set the TV to the same channel
as the output channel
of the cable converter
box.
Use the cable converter
box channel
selector Io select the
channel
you want to watch.
i
_)program
a timerrecording
with
this hookup,
see
++Timer
reeotzling,_
are progrannned
d_ff_,rently...
'" above
h:/?.
The cable
co t _erte "b_._ nt
't be ot
d _ i A' tz, wtz/ing.
Advertisement
Table of Contents
