Sears LXI series 580.55914490 Owner's Manual page 34

PLAYBACK OF PRE-RECORDED CASSETTE
Symptom Check Point & Correction
"PLAY" button cannot be engaged. • Set "CAM/OFFNCR" switch to "VCR" position.
No picture appears on television screen when • Set the television to the video camcorder channel
"PLAY" button is pressed. (TV is connected to the (3 or 4) depending upon the selected channel on
video camcorder by using RF Converter.) the RF OUTPUT Switch.
Interference on playback picture. • When you see the playback picture on your TV,
adjust fine tuning knob on television set to obtain
best picture.
• The pre-recorded tape is EP recording.
This video camcorder is for use in SP recording
only.
• Take the video camcorder to a Service Center for
service.
Picture bends at the top of TV screen. •TV receiver is of older type. it needs to be modi-
fied to work properly with the video camcorder.
Color of your TV screen is too bright, too faint or •Tape is damaged. Try another cassette.
change. • TV set has VIR circuit. Turn it off during playback.
DEW LIGHT
Symptom Check Point & Correction
The "DEW (POWER)" Light flashes
• Condensation on the video camcorder mecha-
nism-wait until the Unit has reached normal room
temperature, and condensation has dried.
"DEW (POWER)" Light will then stop flashing.
BATTERY CONDITION
Symptom Check Point & Correction
The "E F" indication in the Electronic Viewfinder •Try another battery or charge the battery.
flashes to indicate battery is discharged.
No functions will operate. Tape will not eject. • Remove main battery and clock battery. Reinstall
after 5 seconds. Check functions.
33