Sears LXI series 580.55914490 Owner's Manual page 22

• MANUALFOCUSING
1. Set "AUTO/MANUAL" switch to "MANUAL"
position
2. Zoom in on the subject by pressing the "Power
Zoom" switch on the "T" side.
NOTE: See page 22 for "POWER ZOOM
FEATURE".
"POWER ZOOM" Switch
FOCUS Buttons
"AUTO/MANUAL" Switch
3. Focus on the subject by the focus buttons (NEAR
or OO).
NOTE: If focusing is performed without zooming
up first, the picture may become out of focus
when the zoom-in is done during actual picture
taking.
4. Then, zoom out from the subject as desired.
Far Object
Zoom In
Focused
Zoom Out
NOTE: Be sure to release the manual mode after
using. The Auto focusing will not function if the
"AUTO/MANUAL" switch is left in "MANUAL"
position. To release it, set "AUTO/MANUAL" switch
to "AUTO" position.
21