Sears LXI series 580.55914490 Owner's Manual page 16

"STOP" Button
The "STOP" button is used to stop playback, rewind,
and fast forward operations. This "STOP" button has
no effect during record operation.
While in camcorder mode, this button changes the
shutter speed.
"FF" Button
Press this button during stop or rewind mode, and
fast-forwarding starts. "FF" indication appears in the
viewfinder whenever the tape counter or time
remaining is present. Press the button during
playback of tape, and the tape is played back in the
forward direction approximately 3 times faster than
the normal speed to confirm the recorded content.
Press "PLAY" button to return to normal playback
mode or press "STOP" button to stop tape
movement.
"DISPLAY" Button
Pressing this button once causes a 4-digit tape
counter and battery indicator display to appear in
the camcorder's electronic viewfinder. Press again
to display the battery indicator and the real time
counter on the cassette in the camcorder. Press a
third time to get "TR 0:00" for time remaining on the
cassette. Press a fourth time to delete all displays.
FOCUS
• NEAR (30 lib DISPLAY RESET
"RESET" Button
• If the viewfinder display is in the tape counter
mode, pressing "RESET" button will reset the
counter to "0000".
• If the viewfinder display is in the time remaining
mode, pressing "RESET" button will correct the
time remaining accurately for a T-160 tape.
"Diopter Control"
To use the electronic
viewfinder without eyeglas-
ses on, slide this control
knob for your optimum
focus adjustment.
15