Table of Contents
Advertisement
resistance path to carry electricity away from the user, reducing the risk of elec-
tric shock. (See Figure A.)
2.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool's grounding system and must never be attached
to an electrically "live" terminal. (See Figure A.)
Your tool must be plugged into an appropriate outlet, properly installed by a
3.
certified electrician and grounded in accordance with all codes and ordinances.
The plug and outlet should look like that in the following illustration.
(See Figure A.)
220 VOLT, GROUNDED, 3-PRONG,
FIGURE A
Grounded tools require a three wire extension cord. Double Insulated tools
1.
can use either a two or three wire extension cord.
2.
As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a
serious drop in voltage, resulting in loss of power and possible tool damage.
(See Figure B, next page.)
3.
The smaller the gauge number of the wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See Figure B.)
4.
When using more than one extension cord to make up the total length, make
sure each cord contains at least the minimum wire size required.
(See Figure B.)
SKU 93380
For technical questions, please call 1-800-444-3353.
POWER CORD PLUG
EXTENSION CORDS
220 VOLT, GROUNDED,
ELECTRICAL OUTLET
Page 10
Advertisement
Table of Contents
