Top Control - Sanyo PLC-XU100 Owner's Manual

Top Control

q LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.54, 60).
w ON/STAND–BY button
Turn the projector on or off (pp.19, 20).
e COMPUTER 1 button
Select COMPUTER 1 input source (p.26).
r VIDEO button
Select VIDEO input source (p.35).
t POINT
ed7 8 (VOLUME +/–) buttons
–Select an item or adjust the value in the On-Screen
Menu (p.21).
–Pan the image in the Digital zoom + mode (p.34).
–Adjust the volume level (Point
y SELECT button
–Execute the selected item (p.21).
–Expand or compress the image in the Digital zoom
mode (p.34).
q
w
e
r
t
y
u WARNING indicator
i POWER indicator
o COMPUTER 2 button
!0 MENU button
7 8 buttons) (p.23).
Part Names and Functions
u
i
o
!0
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.51, 60).
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(pp.46, 60).
Select COMPUTER 2 input source (pp.26, 36).
Open or close the On-Screen Menu (p.21).
11