Image Mode Selection - Sanyo PLC-XU100 Owner's Manual

Video Input

Image Mode Selection

Direct Operation
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a blackboard.
This is mainly effective on a green colored board, not truly
effective on a black colored board.
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 39–40). This Image memory is
provided in each computer, component, and video input
source.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Select Menu icon.
2
Use the Point
pointer to the desired image mode and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 39–40).
38
7 8 buttons to move the red
ed buttons to move the red frame
Remote Control
IMAGE
button
Image Select Menu
Move the red frame pointer to a
mode and press the SELECT
button.
The selected image mode is check marked.
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Select
Menu icon