Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
TO A RISK OF FIRE, ELECTRIC could result in minor or moderate injury. SHOCK, OR INJURY TO PERSONS NOTICE is used to address practices not related to personal injury. Page 2 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
Such maintained tools. There is a risk of gases are capable of explosion and bursting if the tool is damaged. serious injury to persons. Page 4 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
22. Obey the manual for the air compressor 12. Disconnect tool from air supply when: used to power this tool. a. Unattended. b. Performing any maintenance or repair. SKU 68023 For technical questions, please call 1‑800‑444‑3353. Page 5...
Page 6
SAVE THESE but must be supplied by the operator. INSTRUCTIONS. Vibration Precautions This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, Page 6 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
Add a few more drops after or use of this product. each hour of continual use. Note: For additional information regarding the parts listed in the following pages, refer SKU 68023 For technical questions, please call 1‑800‑444‑3353. Page 7...
Page 8
Air Tool & Spray Gun Portable Setup Page 8 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
Page 9
Air Tool & Spray Gun Stationary Setup SKU 68023 For technical questions, please call 1‑800‑444‑3353. Page 9...
Page 10
The air pressure setting must not exceed job site regulations/restrictions. The air pressure setting must not exceed 90 PSI when being used with work pieces that have a thickness of less than 1-3/4”. Page 10 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
(fire). With the Trigger workpiece prior to pulling the Trigger. It held, carefully lift the tool and press should only fire again if both Trigger and it against the workpiece again. The SKU 68023 For technical questions, please call 1‑800‑444‑3353. Page 11...
If an automatic oiler is not used, add a f. Store indoors out of children’s reach. few drops of Pneumatic Tool Oil to the airline connection before use. Add a few Page 12 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
Pusher pulled back. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. SKU 68023 For technical questions, please call 1‑800‑444‑3353. Page 13...
Page 14
13. Pull out the jammed fastener and the remainder of the fastener strip that is still in the magazine. Dispose of the remaining fastener strip; it may be bent or damaged in some other way. Page 14 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 68023 For technical questions, please call 1‑800‑444‑3353. Page 15...
Page 16
Valve Seat Flat Washer Pin (3x16) Lock Nut Trigger Rubber Grip Safety Plate End Cap Gasket Trigger Pin End Cap O-Ring (1.7x2) Air inlet Plug Pin (3x22) Air Inlet Plug Cover Page 16 For technical questions, please call 1‑800‑444‑3353. SKU 68023...
Page 18
Limited 1‑Year Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase (90 days if used by a professional contractor or if used as rental equipment).