T How To Load Documents - Panasonic Facsimile UF-590 Operating Instructions Manual

How to Load Documents
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 30 PAGES on the ADF at one time. If you have more than 30 pages, wait until transmission or storing
in memory starts as pages feed through, place any remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
CORRECT
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialling procedure.
ENTER STATION(S)
THEN PRESS START 00%
1. The document limitation to send multiple pages is as follows.
NOTE
Up to 20 pages
Up to 30 pages*
* Please note that although the size and thickness meets the specifications, you might not be
able to set 30 pages with some types of papers.
2 Transmitting documents longer than 356 mm requires user's assistance.
3 When transmitting documents longer than A4, please extend the sub-tray as shown below.
Document Guides
Document Size
Up to 257mm X 364mm
A4 size
Document Sub Tray
Loading Documents
INCORRECT
Document Thickness
0.06 mm to 0.12 mm
0.06 mm to 0.10 mm
41