Manual Number Dialling - Panasonic Facsimile UF-590 Operating Instructions Manual

Sending Documents
Memory Transmission

Manual Number Dialling

To dial the telephone number manually, follow the steps below.
1
2
3
NOTE
48
Set document(s) face down.
Enter a telephone number from the keypad.
(Up to 36 digits)
You can also designate more that one destination.
Ex:
5 5 5 1 2 3 4
The document is stored into memory with a file number.
Then starts dialling the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to store into memory.
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a"/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex : 9 PAUSE * 5551234
3. This feature is called "Quick Memory Transmission". If you wish to store all the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to " Invalid". (See page 39)
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE * NO.002
PAGES=001 05%
* DIALLING * NO.002
5551234
PAUSE
to