Related Manuals for Haier P60A11-AK
Summary of Contents for Haier P60A11-AK
- Page 1 TFT-LCD TELEVISION OWNER`S MANUAL MODELS: P50A11-AK P60A11-AK Please READ this manual carefully before operating your TV, and retain it for future reference.
- Page 2 " " Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come.
-
Page 3: Table Of Contents
CONTENT CONTENT BEFORE OPERATING Warning......................1 Important Safety Instructions................2 Buttons and interface location................4 Remote controller....................6 Remote controller key function................7 External equipment connections................8 BASIC OPERATING Switching on/off the TV set................14 Choose the Menu language................14 Choose the Input Source ................. 14 Searching Channel....................15 Watching TV Program..................18 Picture Control Functions................. -
Page 4: Warning
Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. -
Page 5: Important Safety Instructions
Important Safety Instructions The product should be tightly fixed to avoid To avoid fire hazards, do not use this drop damages and even fire. product under direct sunlight or closely to heat sources. Unplug the power supply and antenna of Do not locate the product close to water the product when there is a rainstorm, or oil, which may cause fire hazards. - Page 6 Important Safety Instructions Don't use or store inflammable materials Don't place the product in a humid area to near the product to avoid explosion or fire avoid fire hazards. hazards. Never touch the plug when your hand is wet The antenna of the product should be away as this might cause electric shocks.
-
Page 7: Buttons And Interface Location
Buttons and interface location - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Front panel Control MENU jack USB2 Side USB1 VOL+ VOL- VIDEO input VIDEO TV/AV L-AUDIO-R AUDIO POWER left and right audio input. - Page 8 Buttons and interface location Rear panel Control AV OUT ANT. IN Pb/Cb Pr/Cr L AUDIO R VIDEO L AUDIO R S-VIDEO IN HDMI /DVI VIDEO AC IN VGA IN AV1 IN This TV operates on AC power. Never attempt to operate the TV on DC power. AC In HDMI Input Connnect a signal to HDMI/DVI...
-
Page 9: Remote Controller
Remote controller Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions As strong light may interfere the Make sure that two AA alkaline batteries... -
Page 10: Remote Controller Key Function
Remote controller key function POWER Information display Turns your TV or any other Display of current channel programmed equipment on signals, program and systems or off, depending on mode. Picture still Nicam select button DISPLAY POWER MUTE Picture SIZE button Switches the sound on or off. -
Page 11: External Equipment Connections
External Equipment Connections - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. outdoor antenna (not supply) Antenna input 75 standard coaxial type ANT IN 75 coaxial cable twin-lead cable Plug Antenna adapter (additional purchase) -
Page 12: Choose Your Connection
External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. -
Page 13: Dvd Setup
External Equipment Connections DVD Setup How to connect . Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure. -
Page 14: Pc Setup
External Equipment Connections PC Setup How to connect Use the TV`s VGA IN port for video connections. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required. How to use 1. Turn on the PC and the TV. PbCb PrCr L AUDIO R... -
Page 15: Connecting Headphones
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. ANT IN Note Prolonged use of headphones at a high volume... -
Page 16: Switching On/Off The Tv Set
Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Switching ON/OFF the TV set Please press down the power switch to switch on AC power supply and the power indicator will light . -
Page 17: Searching Channel
Searching Channel This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search Press MENU button and then use VOL+/- button to select the Tuning menu. -
Page 18: Channel Edit
Searching Channel Channel Edit Press MENU button and then use VOL+/- button to Channel Edit >>> select the Tuning menu. Exchange >>> Search Set >>> Auto Search >>> Press VOL+ button and then use CH+/- button to select Channel Edit item. Picture Sound Tuning Function Adjust... - Page 19 Searching Channel Channel Exchange Press MENU button and then use VOL+/- button to select the Tuning menu. Channel Edit >>> Exchange >>> Search Set >>> Press VOL+ button and then use CH+/- button to Auto search >>> select "Exchange" item. Picture Sound Tuning Function Adjust...
-
Page 20: Watching Tv Program
Watching TV Program You can watch TV program in a presetting channel. To select the TV mode Before watching TV program, you may ensure your TV in TV mode. Press TV/AV button to select TV mode. How to select the desired program Using "Program number"... -
Page 21: Picture Control Functions
Picture Control Functions The TV menu gives you can an overviews of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. How to select picture modes You can quickly select the desired picture mode from three preset modes and one customized mode. -
Page 22: Aspect Ratio Control
Picture Control Functions Aspect Ratio Control Press the PIC.SIZE button the Aspect Ratio menu appearance on the screen. 4:3 mode Choose when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. -
Page 23: Sound Control Functions
Sound Control Functions How to choose sound mode You can quickly select the desired sound mode from four preset modes and one customized mode. Press the SSM button to select the desired sound quality. Five kinds of sound modes (i.e., "Standard","Personal", "Theater", "News"and"Music") can be selected in turn. Personal A spare setting that can be adjusted to personal tastes Standard... - Page 24 Sound Control Functions Eliminate Sound When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen.
-
Page 25: Timer Functions
Timer Functions Current time setting The current time will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the rear panel, the current time looses power and will need to be reset when the power is reconnected. -
Page 26: Function Menu
Function Menu Menu Set Menu Set Press MENU button and then use VOL+/- button to select >>> >>> Function menu . Picture Optimize >>> Scene Mode Film Press VOL+ button and then use CH+/- button to select Multicolor Window >>> Menu Set, and then press VOL+ button to enter the submenu. - Page 27 Function Menu Picture Optimize Press MENU button and then use VOL+/- button to select Menu Set >>> Function menu . >>> Picture Optimize >>> Scene Mode Film Press VOL+ button and then use CH+/- button to select Multicolor Window >>> Time Skip 00:00 Picture Optimize, and then press the VOL+ button to enter...
- Page 28 Function menu Multicolor Window Press MENU button and then use VOL+/- button to select Function menu . Menu Set >>> >>> Picture Optimize >>> Scene Mode Film Press VOL+ button and then use CH+/- button to select Multicolor Window >>> Multicolor Window, and then press VOL+ button to start.
-
Page 29: Adjust Menu
Adjust Menu In VGA input mode , H-Position and V-Position can be used to adjust the picture position. When VGA HDMI input mode is set Press MENU button and then use VOL+/- button to select Adjust menu . Auto Adjust >>>... -
Page 30: Lock Setup
Lock Setup The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. How to use the password function Press H.LOCK button, Password will appear on the Password ---- screen. - Page 31 Lock Setup Preset Channel Preset Channel is opted for setting up preset channel. Press CH+/- button to select preset Channel. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Child Lock Press CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode.
-
Page 32: Other Functions
Other functions NICAM Press the I/II button will result in fast swap of NICAM function of current program. Display function Press the DISPLAY button, then the channel number and system will be displayed on the screen. Press the DISPLAY button again,it is disappear. -
Page 33: Stream Media Broadcast System
Stream media broadcast system Stream media play prepare 1. Supporting equipment are used for internal files. This 1.Equipment supporting Mass and television can only play some AVI Storage agreements include USB, and MPG files of this format. Those mobile hard disk, card reader, some files with suffix of dat are not movie MP3 and digital camera. -
Page 34: Usb Setup
Stream media broadcast system Stream media system setup Note: Memory cards or USB devices are not supplied with this TV. USB setup 1 Insert USB in the card slots at the front of TV. 2 Insert it to be clicked in. 3 Press USB button on the remote controller to enter the stream media system. - Page 35 - Do not subject the card to excessive pressure or strong impacts. - Malfunctions of the unit or card may result in data loss or damage to the card. - Haier shall not accept any liability for damage or loss of stored data. Warning: Memory cards can be swallowed by young children.
- Page 36 Stream media broadcast system To start the media play Press the USB button on the remote to enter stream media system. AAA Multimedia Player DEVICE The system start up about 2 seconds, and then i nsert DISPLAY POWER COPY USB in the card slots STILL I/II PIC.SIZE...
- Page 37 Stream media broadcast system To select stream media broadcast system Press or button to select DEVICE item. AAA Multimedia Player DISPLAY POWER DEVICE (The device be inserted and identified). I/II MUTE STILL PIC.SIZE COPY Press ENTER button to enter TV/AV S-VIDEO DVD/DTV PC/DVI adjusted option.
- Page 38 Stream media broadcast system Print Picture Setup This machine has designed three printings pictures method. Single picture printing, Programming printing, 12 pictures browsing printing DISPLAY POWER Single picture printing I/II MUTE STILL PIC.SIZE Multimedia Player Press button to select DEVICE TV/AV S-VIDEO DVD/DTV PC/DVI Picture option Press ENTER button COPY...
- Page 39 Stream media broadcast system To play Movie Press button to select Multimedia Player Movie option. DEVICE DISPLAY POWER Press ENTER to enter playing COPY menu. I/II MUTE STILL PIC.SIZE Movie SETUP TV/AV S-VIDEO DVD/DTV PC/DVI Press again or button to select desired movie, and Q.VIEW press again ENTER to enter...
- Page 40 Stream media broadcast system To enjoy music Press button to select Multimedia Player Music option. DEVICE Press ENTER button to enter COPY play menu. Music DISPLAY POWER SETUP Press or button to select I/II MUTE STILL PIC.SIZE the desired music, and then press ENTER button to the TV/AV S-VIDEO DVD/DTV PC/DVI playing music interface.
- Page 41 Stream media broadcast system To select the Music and PIC item Press button to select Multimedia Player Music and Pic option, and DEVICE press ENTER button to enter play menu. COPY DISPLAY POWER MUTE STILL I/II PIC.SIZE Comb SETUP Press or to select desired TV/AV S-VIDEO DVD/DTV PC/DVI file(picture and music), and press ENTER button to enter...
- Page 42 Stream media broadcast system To select text Press button to select Multimedia Player text option, and press ENTER DEVICE button to enter text menu. COPY DISPLAY POWER MUTE STILL I/II PIC.SIZE Text Press or to select desired SETUP text, and press ENTER button TV/AV S-VIDEO DVD/DTV PC/DVI to confirm.
- Page 43 Stream media broadcast system Copy file function Press to select Copy item. AAA Multimedia Player Press ENTER button to enter DEVICE DISPLAY POWER the copy menu. I/II MUTE STILL PIC.SIZE COPY Press button to select the TV/AV S-VIDEO DVD/DTV PC/DVI SETUP desired item of copy.
- Page 44 Stream media broadcast system To select language Press to select SETUP item. AAA Multimedia Player DEVICE COPY Press ENTER button to DISPLAY POWER enter SETUP menu. SETUP I/II MUTE STILL PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Press to select language option, and then Multimedia Player Q.VIEW DEVICE...
- Page 45 Stream media broadcast system Set Printer Press to select AAA Multimedia Player SETUP item. DEVICE COPY DISPLAY POWER Press ENTER button to SETUP enter SETUP menu. MUTE STILL I/II PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Press to select Set Q.VIEW Printer option, and then Multimedia Player DEVICE press ENTER button to...
-
Page 46: Maintenance
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen . -
Page 47: Troubleshooting
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Problem Possible remedies Turn on the power supply; No picture, Properly plug the TV set to the power socket;... -
Page 48: Specifications
Specifications Basic specification and parameter Model P50A11-AK P60A11-AK Power ~ 15 -240 Power Consumption Color System PAL NTSC, SECAM Sound System D/K I B/G, M Video input AV CVBS , S-VIDEO, YPbPr/YCbCr, HDMI or DVI VGA Operating temperature range: 5... -
Page 49: Format
Format Recommendatory HDTV/SDTV(YPbPr/YCbCr) format Sequence Refresh Frequency Format Number 480i/480p 576i/576p 50/60 720p 50/60 1080i/1080p Recommendation PC connection input format: sequence V-Frequency H-Frequency Format number 640*480@60Hz 31.5 37.88 800*600@60Hz 1024*768@60Hz 48.36 Recommendatory) 63.9 1280*1024@60Hz 1600*1200@60Hz Recommendation HDMI connection input format: Recommendation DVI connection input format: Sequence Sequence...