Page 1
OWNER`S MANUAL TFT-LCD TELEVISION MODEL: L42A9-AK L46A9-AK Please READ this manual carefully before operating your TV, and retain it for future reference.
Buttons and interface location... 4 Remote controller...7 Remote controller key function...8 Effective range of remote controller...9 External equipment connections...10 BASIC OPERATING Switching on/off the TV set...16 Select input modes ... 17 Searching channel... 18 Watching TV program...20 Picture control functions..23 Sound control functions...25 Time functions...28...
Warning WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing.
Important The product should be tightly fixed to avoid drop damages and even fire. Do not locate the product close to water or oil, which may cause fire hazards. Do not use damaged or worn electric plugs and keep electric cord away from heat sources to avoid electric shocks or fire hazards.
Page 5
Important Don't use or store inflammable materials near the product to avoid explosion or fire hazards. The antenna of the product should be away from electric cable to avoid electric shocks. Always make sure that the televisionis well plugged as poor electric connection might cause fire.
Buttons and interface location - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Front panel Control TV/AV - CH + - VOL + TV/AV - CH + - VOL + Buttons and functions 1 Channel number increase and decrease.
Buttons and interface location L42A9-AK USB Socket VIDEO Input Connects the video signal from a video device. AUDIO Input connect to hear stereo sound from an external device. Switch power on/off Power Cord Socket This TV operates on AC power.
Page 8
DVI or other appliance audio frequency output terminals. Switch power on/off Power Cord Socket This TV operates on AC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power Antenna Input...
Remote controller Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions As strong light may interfere the signals, change your position to...
ZOOM/MOVE SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP RETURN ENTER ZOOM HELP POWER Turns your TV or any other programmed equipment on or off, depending on mode. Nicam select button PIC. SIZE button picture scale DVD mode Select DVD mode PC/DVI mode Select PC/DVI mode.
. Battery replacement is necessary when the remote controller acts inconsistently or stops operating the display. right front 8m DISPLAY POWER MUTE STILL I/II PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW VOL- MENU VOL+ S SM -/-- ZOOM/MOVE SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP...
To improve picture quality in a poor signal area, purchase and install a signal amplifier. If the antenna needs to be split for two Tv`s, install a WaySignal Splitter in the connections. If the antenna is not installed properly, contact your dealer...
. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output, use S-Video.
VGA IN or DVI INPUT to display the PC on the TV. If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either VGA or DVI; (the other mode is set to Plug and Play automatically by the TV.) Then, make the corresponding audio connection.
Page 15
Connect Woofer 1. Take the woofer out, and place it the hind rind. (See picture) 2. Connect cable to the woofer terminal and LCD TV terminal, and insert the connecting cable into the terminal slot. Loudhailer...
Page 16
Connect Woofer 1. Take the woofer out, and place it the hind rind. (See picture) 2. Connect cable to the woofer terminal and LCD TV terminal, and insert the connecting cable into the terminal slot. Loudhailer...
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. ANT IN Power source AC Outlet Wider Hole and Blade Polarized AC Cord Plug Plug a set of headphones into the 3.5mm...
Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Power ON/OFF Switching ON/OFF the TV set Please press down the power switch to switch on AC power supply and the power indicator will light .
Then press CH+/- to select the TV item, and press VOL+/- to ensure it. TV: the input source from ANT IN terminal output. AV1 : the input source from AV1 terminal output. AV2 : the input source from AV2 terminal output.
Searching Channel This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.
Searching Channel Manual search Q.VIEW VOL- MENU VOL+ S SM Manual search Press the CH+/- buttons or the PROGRAM NUMBER 0-9 button to choose desired channels regard channel 1 as example Press the MENU button and VOL+/- button, till the TUN. menu shown on the right display on the screen.
How to select the desired sound Press the VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.
Page 23
Watching TV Program continued Watching TV program Q.VIEW VOL- MENU VOL+ S SM Q.VIEW VOL- VOL+ MENU S SM If the color of some channel is abnormal Usually this should be set in the auto position. However if the color...
Watching TV Program continued Watching TV program Q.VIEW VOL- MENU VOL+ S SM Q.VIEW VOL- VOL+ MENU S SM Prog. Switch . Press MENU CH+/-and VOL+/- button, till the TUN. menu shown on the right will display on the screen.
Picture Control Functions Multiple picture modes Q.VIEW VOL- VOL+ MENU S SM Q.VIEW VOL- MENU VOL+ S SM How to select picture modes You can quickly select the desired picture mode from three preset modes and one customized mode. Press the PSM button to select the desired picture quality.
Page 26
Press VOL+ to enter the list. Select Auto, Weak , Medium or Strong according to the image noise. Press MENU return to the picture menu. In other modes TV/AV1/AV2/USB Mode Personal Contrast Brightness Chroma Sharpness BackLight Auto Only N system.
Sound Control Functions Multiple sound modes Q.VIEW VOL- VOL+ MENU S SM Q.VIEW VOL- MENU VOL+ S SM How to choose sound mode Press the SSM button to select the desired sound quality. Four kinds of sound modes (i.e., Standard , Theater , Personal ,and Music ) can be selected in turn.
The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV`s speakers. Press CH+/- button to Select Surround, press VOL+/- button to set Surround as Off or On AVC( Auto volume contol)
Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. If you want to recover the sound, press the MUTE button again or directly press the VOL-/+ buttons.
Clock setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the rear panel, the clock loses power and will need to be reset when the power is reconnected.
Page 31
Time Functions Remind Time and Remind Program setting Q.VIEW VOL- MENU VOL+ S SM How to use the remind time and program Program remind timer, that displays an on-screen reminder prompt, when a program on a different channel is due to start. Press MENU and VOL+/- button to call up the TIME...
Function menu It is possible to select language, OSD transparency, menu timeout, calendar, 3A optimize, time skip. Q.VIEW VOL- VOL+ MENU S SM Function menu operation Press MENU and VOL+/- button to enter the FUN. Menu. Press CH+/- to select desired item.
Adjust menu Q.VIEW VOL- VOL+ MENU S SM Press MENU and VOL+/- button to enter the ADJ. menu. Press CH+/- to select desired item. Press VOL+/- button to adjust the values level. . Press menu to exit. Display Mode Repeat step 2 and 3 to set the Display Mode. Choose when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the...
Page 34
2. H-position,V-position,Auto Adjust are not available in TV mode. 3. Auto Adjust is not available in AV and S-VIDEO mode. PC setting Press PV/DVI button to select PC or DVI mode.
Page 35
Adjust menu In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference. Q.VIEW VOL- VOL+ MENU S SM NOTE As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect.
Lock setup The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. SHUTTLE SLEEP H.LOCK TIME.SKIP Note: If Clear Lock is activated, the password setup cannot be changed. How to use the password function Press H.LOCK button, Password will appear on the screen.
Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL S SM channel number.(The item is not available except TV signal.) (To set On, some operation such as search will be Prog. Num...
Page 38
Lock setup Q.VIEW VOL- MENU VOL+ S SM Child Lock Press CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode. If lock on mode is set, Child Lock is in activated automatically. In such case, if Child Lock button (button on the television) is pressed, the screen will display Child Lock, which can be erased by press of EXIT button.
Press the DISPLAY button it is disappear. Sleep The TV set will switch automatically to standby at the preset time with the SLEEP time on. You may set the sleep time. each press of SLEEP button repeatedly on the remote...
Page 40
Scan If you want to select a desirable program, you may scan all the TV programs in memory. You can simply press Scan button to do this. Press scan button once, there are nice pictures on the screen, press Scan button again, there are sixteen pictures on the screen to scan.
Stream media broadcast system Stream media play prepare 1. Supporting equipment 1.Equipment supporting Mass and Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera. 2 . E q u i p m e n t s u p p o r t i n g P T P agreement includes some digital camera.
Note: Memory cards or USB devices are not supplied with this TV. USB setup 1 Insert USB in the card slots at the right side the TV. 2 Insert it to be clicked in. 3 Press USB button on the remote controller to enter the stream media system.
Page 43
Stream media broadcast system Removing USB device Press to select Remove USB, and press ENTER button to ensure it. press EXIT button to exit menu. 3 Remove the memory card/USB device. 4 If to remove the card device, press EXIT button to return to the main menu, and remove the card.
If to exit USB system, you need to return to the main menu to protection card data.. Note: If there are no operation two minute later, the TV will enter the saver automatically, at the time, press any button of USB system to exit the saver menu. To operate the menu 1.
Stream media broadcast system DISPLAY POWER I/II MUTE STILL PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW VOL- MENU VOL+ S SM -/-- ZOOM/MOVE SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP RETURN ENTER ZOOM HELP Note: the play file menu are different with your USB devices.
Stream media broadcast system DISPLAY POWER I/II MUTE STILL PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW VOL- MENU VOL+ S SM -/-- ZOOM/MOVE SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP RETURN ENTER ZOOM HELP To enjoy music Press button to select Picture button to select "Music"...
"Movie" option. DISPLAY POWER Press ENTER to enter play menu. I/II MUTE STILL PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Press again button to select desired Q.VIEW music, and press again ENTER button to play it. VOL- MENU VOL+ On screen display, press...
Stream media broadcast system DISPLAY POWER MUTE STILL I/II PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW VOL- VOL+ MENU S SM -/-- ZOOM/MOVE SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP RETURN ENTER ZOOM HELP To select the Music and PIC item...
Copy file function "File Copy" item. DISPLAY POWER I/II MUTE STILL PIC.SIZE the copy menu. TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW enter the file menu, and press select "Card" or "USB" VOL- MENU VOL+ S SM card or USB, and select the...
Page 50
Stream media broadcast system DISPLAY POWER I/II MUTE STILL PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI Q.VIEW VOL- MENU VOL+ S SM -/-- ZOOM/MOVE SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP RETURN ENTER ZOOM HELP To select language . Press to select "SETUP "...
Specifications External Antenna Impedance Storage Temperature Storage Humidity L42A9-AK L46A9-AK L42A9-AK 1366X768(Dot) ~150-240V , 50/60Hz PAL, SECAM, AV NTSC 75 ohm 90%, non-condensing Unit Size: WxDxH) 1275mmX152mmX740mm Speaker included 1138mmX370mmX830mm Stand and Speaker included L46A9-AK 1366X768(Dot) Unit weight 27Kg 37Kg...
Extended Absence If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power cord to protect against possible damage from lightning or...
(red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound might be produced.