Montigo H38SVO-ST Installation & Maintenance Manual page 12

H*38VO-ST Outdoor Gas Fireplace
WARNING!
Do not attempt to clean glass when hot.
Do not clean glass with abrasive materials as any glass etching may
cause premature glass failure.
Do not operate this fireplace without the glass door, or with a broken
glass door.
Installing the Glass Beads
This fireplace (HL38VO-ST) is supplied with Designer Glass beads.
Remove the Door as shown on page 10 and follow these instruction
to ensure all parts are removed or replaced as required.
Once the glass doors are removed place the glass beads across the
pan surrounding the burners as shown in Figure 12.
NOTE: DO NOT Cover burners with beads or the optional rocks.
Figure 12.
Installation of glass beads . Note: Ensure the beads do not cover
the burners or pilot.
Page 12
Installation
L42DF-ST
XG0817 - 030412