Grizzly G0682 Owner's Manual page 30

3.
rotate the blade guard and linkage out of the
way, as shown in figure 43.
blade guard
linkage
figure 43. exposing blade.
4. remove the arbor cap screw. it has left-hand
threads and loosens when turned clockwise
(see figure 43).
5.
remove the blade and blade flange (figure
44).
blade Flange
blade
figure 44. blade removed.
-28-
6.
place the blade flange on the new blade, as
shown in figure 45.
figure 45. installing new blade.
7. place the blade and flange over the arbor,
then thread and tighten the left-hand thread
arbor cap screw (figure 46).
blade guard linkage
arbor Cap screw
figure 46. tightening blade.
8.
lower the blade guide and reconnect the
blade guard linkage with the cap screw.
g0682 12" Cold Cut saw (mfg. since 12/10)
blade Flange
blade
tighten