Miele DA 289-4 Operating And Installation Manual page 19

Cleaning the grease filters
^ By hand: use a scrub brush with a
solution of warm water and mild
detergent.
Do not use the pure detergent,
aggressive all purpose cleaners,
oven sprays or limescale removers.
They could destroy the filters.
^ In a dishwasher: place the filters
vertically in the lower basket, making
sure that the spray arm is not
blocked.
Use a wash program with a max.
temperature of 150°F (65°C). In a
Miele dishwasher use the "Normal"
program.
Use the recommended amount of
dishwasher detergent. Overuse could
destroy the filter.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^ After cleaning, the filter can be
placed on a towel to air dry.
^ Clean the air intake panel according
to "Cleaning the casing".
^ While the filter and the air intake
panel are removed, clean any dirt or
grease from the interior casing to
prevent the risk of fire.
Cleaning and care
^ Push the grease filter back in place.
^ Hook the air intake panel on the
latches and push a little to the left.
Push it toward the unit so that it clicks
in place.
^ After returning the grease filter, press
the grease filter button for 3 seconds
to reset the timer.
The indicator light will go out.
^ If the grease filter and air intake
panel are cleaned before the grease
filter timer has reached its maximum,
the grease filter button should be
pressed for 6 seconds to reset the
counter to zero.
19