Source Rename; Source Level; Input Select; Hide Sources - Marantz NR1604 Owner's Manual

Source Rename

Change the display name of the selected input source.
This is convenient when the input source name of your device and the input source name of this unit are
different. You can change the name to suit your needs. When the renaming is completed, the name is
displayed on this unit's display and on the menu screen.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CD / TV AUDIO / M-XPort :
Change the display name of the selected input source.
• Up to 12 characters can be input.
• For character input, see page 107.
Set Defaults : The "Source Rename" settings are returned to the default
settings.
• Reset : Reset to the defaults.
• Cancel : Do not reset to the defaults.
If you select "Set Defaults" and press
source names to the factory defaults?" is displayed. Select "Reset" or
ENTER
"Cancel", and then press .

Hide Sources

Remove from the display input sources that are not used.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / iPod/USB / CD / TUNER /
Favorites / Internet Radio / Media Server / Pandora / SiriusXM / Spotify / Flickr / TV AUDIO /
M-XPort : Select input source that is not used.
• Show : Use this source.
• Hide : Do not use this source.
NOTE
• Input sources being used in the MAIN ZONE or ZONE2 cannot be selected.
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Hide" cannot be selected using the input source select button.
DVD
Setting details
ENTER
, the message "Reset all
Default settings are underlined.
Setting details

Source Level

• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)

Input Select

Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
for the different input
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
• "Digital" can be set for input sources for which "DIGITAL" is assigned
to "Auto".
at "Input Assign" (vpage 121).
• When digital signals are properly input, the
the display. If the
(vpage 121) and the connections.
• If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV AUDIO" is fixed to ARC.
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
CBL/SAT DVD
• This item can be set for input sources for which "DIGITAL" is assigned
Blu-ray GAME
at "Input Assign" (vpage 121).
AUX1 AUX2
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
MEDIA PLAYER
CD TV AUDIO
122
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check "Input Assign"
Inputs