Advertisement
on the store button also allows you to manage existing presets. The store window
displays existing presets. Click on an existing preset to either replace or delete it.
4. Category Selector –
make them easier to locate. The Category knob is used to select from one of
the predefined categories of presets. You can also click the category name,
which brings up a combo box list allowing you to select a category from the list.
After selecting a category, the "PRESET" field will update, displaying all presets
available within the selected category.
5. Preset Selector –
select a preset or click on the preset name to load a new preset from the combo
box list.
6. Real Time Visualization –
clicking anywhere in the Real Time Visualization window. When off, the plug-in
name is displayed – this conserves CPU power. When on, the Spectral Intensity
Analyzer is displayed, providing real-time visual feedback of the effect signal's
amplitude (Y axis) over the frequency spectrum (X Axis).
7. Input/Output Meters –
in (input) and exiting the plug-in (output).
8. Parameter Knobs –
corresponding parameter. You can also double click in the parameter value field
above each knob and type in the desired value – all values are immediately
snapped to the closest available value.
9. Parameter Knob View Button –
parameter knobs. Click again to get back to the first set of parameter knobs.
The presets have been broken down into categories to
Once a category has been selected, turn the Preset knob to
Real Time Visualization can be turned on and off by
This window displays the signal level entering the plug-
Click and drag these knobs to change the value of the
Click this button to display the additional
MPX Native Reverb
5
9
Advertisement
