Advertisement
Step 3 –
Processing a single track: If you
inserted the MPX Plug-In directly on
a single source track, as described in
step 2 , open the MPX Plug-In. Press
the play button in the DAWs transport
to audition the audio. Adjust the Mix
control until you have reached the
desired amount of reverb effect.
Processing multiple tracks: If you
inserted the MPX Plug-In on an aux
channel, as described in step 2, open
the MPX Plug-In. Press the play button
in the DAWs transport to audition the
audio. Set the Mix control to 100%.
Ensure that the reverb bus level fader is
set to 0 to begin with.
10
9
MPX Native Reverb
Set levels
Mix set
to 100%
Reverb Bus
Level set to 0
Advertisement
