M-Audio Delta DiO 2496 Manual page 18

7. Within your recording software, select "Delta-DiO S/PDIF In" as the audio input
device.
8. Start your software recording and then start your DAT material playing. You
should be able to hear the DAT material through your sound system. This veri-
fies that the digital audio is making it into the DiO correctly.
Transferring from DiO to DAT, monitoring with DAT
1. Connect the DiO coaxial S/PDIF Output to the DAT coaxial S/PDIF Input using
a good quality digital cable.
2. Connect the DAT analog outputs to some type of amplified sound system. The
sound system should be equipped with speakers or headphones.
DAT
SOUND SYSTEM
Typical Setup 2
Coaxial In
Analog Out
18
Coaxial
OUT IN
R L OUT
DELTA DiO 2496
Out
IN