Presetting Stations / Recalling Preset Station - Sangean PR-D9CL User Manual

Presetting stations
You may store your preferred AM/FM radio stations to the preset sta-
tions ( to 5). The procedure for setting preset Stations is described be-
low. Note that the radios for AM and FM are saved together in the pre-
set stations so there are 0 of them. Your preset stations are preserved
in the event of a power failure.
. Press the Standby button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button (1-5) until the display shows
'M1' for example after the frequency. The station will be stored using
the preset number. Repeat this procedure for the remaining presets
as you wish.
4. Preset stations which have already been stored may be overwritten
by following the above procedure if required.
GB
3