Recalling Preset Stations - Mw / Lw / Fm / Air; Recalling Preset Stations - Sw Only; Locking Preset Stations - Sangean ATS-909X2J Operating Instruction

The ultimate fm / sw / mw / lw / air multi-band radio
Table of Contents

Advertisement

If a page on the SW band already has 9 stations preset in the radio's memory, then you will
have to either select a different page manually or overwrite one of the existing presets by
pressing and holding the numeric button of that preset position. Overwritten presets will be
moved to a different page if there are pages left with available preset positions.
NOTE
Because shortwave reception can be affected by weather conditions, radio stations on the
shortwave band may have different frequencies on which they can be received depending
on the conditions. It is therefore a good idea to store several frequencies for the same radio
station on the same preset page, as the radio will automatically scan for the preset with the
strongest signal when a page is selected on the SW band.
RECALLING PRESET STATIONS – MW / LW / FM / AIR
Follow these steps to recall a preset station on the MW, LW, FM and AIR bands:
JP
1. Turn on the radio using the Power button
2. Select the desired waveband by pressing the corresponding button.
EN
3. Select the page that the preset station is on (if applicable) by repeatedly pressing the Page
button
27
.
4. Press any of the numeric buttons
RECALLING PRESET STATIONS – SW ONLY
Follow these steps to recall a preset station on the SW band:
1. Turn on the radio using the Power button
2. Select the desired waveband by pressing the corresponding button.
3. Press the Page button
Down buttons
4. Press the Enter button
page and automatically select the preset with the strongest signal on the selected page.
5. Press any of the numeric buttons

LOCKING PRESET STATIONS

After storing preset stations, it is possible to lock them in order to prevent accidentally
deleting them, for instance because of accidentally starting the ATS feature.
1. Turn on the radio and recall the desired preset station as previously described.
2. Press the Memo button
The Memo indicator
blinking on the display.
3. Press the Memory Lock button
After locking a preset station, the Preset lock indicator
indicate the preset station is locked and cannot be deleted.
Repeat this procedure to unlock preset stations again.
52
19
once and then use the Rotary Tuning knob
27
to select the desired page number.
18
to confirm the page number. The radio will now scan the selected
30
19
24
.
and the preset position of the selected station
X
26
10
.
to recall the corresponding preset station.
10
.
to recall the corresponding preset station.
.
or Tuning Up /
16
will now be
S
will be shown on the display to
V

Advertisement

Table of Contents
loading

Table of Contents