Presetting Stations - Fm; Recalling A Preset Station - Dab And Fm - Sangean DPR-2 Operating Instruction

Presetting stations - DAB and FM
There are 5 memory presets for each of the 2 wavebands.
1. Press the On/Off button switch on the radio.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display
shows e.g. "Preset 1 stored". The station will be stored under the
chosen preset button. Repeat this procedure for the remaining
presets.
4. Stations stored in preset memories may be overwritten by following
the above procedure.

Recalling a preset station - DAB and FM

1. Press the On/Off button to switch on the radio.
2. Select the required waveband by pressing the Band button.
3. Momentarily press the required Preset button, your radio will tune
to the station stored in preset memory.
13
DPR-2_381K701.p65 14 2003/11/19, 上午 10:45