Samson XM610 Owner's Manual page 8

Controls and Functions
FRONT PANEL CONTROLS
24 BIT DIGITAL EFFECT SECTION
The XM610 features a built-in, 24 Bit Digital Effects processor with 100 high
quality, studio grade effects like Delay, Chorus and Reverb. The following sec-
tion describes the features of the powerful on-board digital effects section.
6
SELECT - Digital Effects Select Switch
The SELECT switch allows you to pick one of the 100 built-in digital effects.
Simply rotate the SELECT to choose the effect.
Effect PROGRAM List
This section identifies the ten banks of built-in DSP effects presets. The first
bank of 10 presets are designed for live performance, and the following banks
are set up in groups by the types of effects.
7
EFX LEVEL - Master Effect Send
The EFX LEVEL control is used to send the effect mix bus to an external effect
device connected to the AUX 2 SEND jack.
8
EFX ON - switch
The EFX ON control is used to turn the internal Digital Effect on and off. The
effects are by-passed when the switch is in the out position and the display
shows two dashes.
TAPE IN AND AUX IN SECTION
This allows you to adjust the level of the signal from an external device such
as a MP3 , cassette, or CD player or from an external effect device.
9
VOLUME - Tape In Level Control
This adjusts the amount of signal that is sent from the TAPE IN jacks to the
MAIN bus.
10
VOLUME - Aux In Control
This adjusts the amount of signal that is sent from the AUX IN jacks to the
MAIN bus.
6
6
7
8
9
10