Download Print this page
Samson Xm 610 Specification Sheet
Samson Xm 610 Specification Sheet

Samson Xm 610 Specification Sheet

6 channel 600w powered mixer
Hide thumbs Also See for Xm 610:

Advertisement

Quick Links

PRO
PRODUCT
XM 610
SERIES
XM
TYPE:
POWERED
MIXERS
DESCRIPTION
6 CHANNEL 600W POWERED MIXER
CATEGORY
POWERED MIXERS
GENERAL DESCRIPTION
The XM610 is a six channel, 600 Watt powered mixer with
built-in 24 BIT DSP (Digital Signal Processor) effects. The
XM610 will give you clean, clear sound reproduction thanks
to the high quality, low noise microphone preamps, super
clean mix bus, two on-board 7-band graphic equalizers
and the high output/low distortion power amplifier. For
studio quality processing, you can add one of the 100
dazzling digital effects including Delays, Chorus and lush
Reverbs to your voice or instruments. The XM610's ingenius
Kickback enclosure allows you to tilt the unit back to see and
operate the controls with ease. The unit is easy to transport
with its compact size and oversized, sure-grip handle. The
super-tough ABS construction ensures reliable, high quality
sound from venue-to-venue and performance-to-performance
day in and night out. Optimized for live sound reinforcement
and commercial installations, the XM610 is an ideal mixer and
power amp solution offering big sound in a compact package.
FRONT PANEL
FEATURES
Six channel powered mixer in ergonomically correct
>
kickback enclosure allowing you to easily see and operate
the front panel functions.
Six Mic / Line inputs with 1/4" phone and XLR connectors.
>
>
2 x 300 Watts, or 300 Watt Main / 300 Watt Monitor, or
600 Watts Bridged power operating modes.
A built-in, 24-bit DSP (Digital Signal Processor) with 100
>
selectable presets including Reverb, Delay and Chorus,
offers dazzling studio quality effects.
>
Dynamic or condenser microphones connect easily to the low
noise mic pre-amps with available 48 Volt Phantom Power.
>
The 3-Band EQ on each channel enables you to tailor the
tonal response for each input.
Two Auxiliary sends on each channel for building an
>
independent mix to send to the DSP effects and monitors.
Dual 7-band Graphic Equalizer for operating in either
>
BACK PANEL
Stereo, or Main / Monitor, allowing the system to be set-up
for maximum gain before feedback.
>
A convenient Tape / CD Input is provided so you can connect
a stereo device for accompaniment or background music.
continues»
©2006 Samson v1.0 5/06

Advertisement

loading

Summary of Contents for Samson Xm 610

  • Page 1 CATEGORY POWERED MIXERS GENERAL DESCRIPTION The XM610 is a six channel, 600 Watt powered mixer with built-in 24 BIT DSP (Digital Signal Processor) effects. The XM610 will give you clean, clear sound reproduction thanks to the high quality, low noise microphone preamps, super clean mix bus, two on-board 7-band graphic equalizers and the high output/low distortion power amplifier.
  • Page 2 348mm SIDE ARCHITECT’S & ENGINEER’S SPECIFICATIONS The Samson XM610 shall be a 6 channel powered mixer. There shall be 6 mic/line channels with 3 band EQ. Each channel shall have a 20dB pad. Each channel shall have 2 aux sends, 1 to the monitor output and 1 to the DSP. The DSP shall have 100 programs of digital effects with a level control to send the DSP signal to the main bus.