Zoom RhythmTrak 234 Operation Manual page 65

ZOOM RhythmTrak 234
•••
1.TRANSMITTED DATA
NONE.
2.RECOGNIZED DATA
1) CHANNEL VOICE MESSAGES
STATUS SECOND
1000 nnnn 0kkk kkkk
1001 nnnn 0kkk kkkk
1001 nnnn 0kkk kkkk
1011 nnnn 0ccc cccc
1100 nnnn 0ppp pppp
1110 nnnn 0vvv vvvv
NOTE: nnnn = MIDI Channel Number ( 0000 - 1111 )
1. Note Off Messages on Drum Channel(s) will be ignored.
2. Default Control Value of SoundChange is 64.
3. Relationship between Program Numbers and Kit Numbers are assigned as
described in Drum Kits/Bass Program List.
4. Pitch Bend values will be used only upper 7bits.
Pitch Bending will be effected continuously on Bass Channel.
Pitch Bender Message on Drum Channel(s) will change initial pitch
at Note On.
MIDI Implementation
THIRD Description
0vvv vvvv NOTE OFF
kkk kkkk : Note No.
vvv vvvv : Note Off Velocity (ignored)
0000 0000 NOTE OFF
kkk kkkk : Note No.
0vvv vvvv NOTE ON
kkk kkkk : Note No.
vvv vvvv : Note On Velocity (not 0)
0vvv vvvv CONTROL CHANGE
ccc cccc : Control No.
vvv vvvv : Control Value
---- ---- PROGRAM CHANGE
ppp pppp : Program Number (See NOTE 3)
0vvv vvvv PITCH BENDER CHANGE (See NOTE 4)
vvv vvvv vvv vvvv Pitch Bend Value
(See NOTE 1)
(See NOTE 1)
(See NOTE 1)
7 Volume
11 Expression
83 SoundChange (See NOTE 2)