Using Midi Equipment To Play The Rhythmtrak - Zoom RhythmTrak 234 Operation Manual

Using MIDI equipment to play the RhythmTrak

Using a MIDI sequencer, MIDI keyboard, or similar MIDI Device you can play the built-in sound
sources of the RhythmTrak
SOUND
JAMMER
Connect the MIDI OUT jack of the MIDI sequencer or other MIDI component to the
1
STEP
[MIDI IN] connector of the RhythmTrak
Use the [FUNCTION] key and pad 13 (MIDI) to assign the tracks of the RhythmTrak
2
234 to receive MIDI channels which are matched to the send channels of the
STEP
•••
external MIDI component.
For information on the MIDI channel setting procedure, see page
47.
3
Play the MIDI sequencer or keyboard.
STEP
The RhythmTrak
•••
numbers received via the [MIDI IN] connector. Program change
messages can be used to switch drum kits and bass programs of
the RhythmTrak
•••
numbers and corresponding drum kits and bass programs, please
refer to the "Reference" section at the end of this manual.
234.
•••
STEP/MEASURE
MEASURE BEAT
DRUM A DRUM B DRUM C BASS
VALUE
+
SOLO
–
MUTE
SOUND CHANGE
VOLUME
PITCH
OPEN HAT
7 CLICK VOL
REPEAT/STEP
234 produces sound according to the note
234. For information on program change
234
•••
SONG/PATTERN
Groove PLAY
MODE
SONG PATTERN
+
TAP STEP PAUSE STOP
–
TEMPO II
REAL-TIME REC
INSERT
/COPY
2
234, using a MIDI cable.
•••
EXIT
DELETE
/ERASE
2
51