Dab Basic Operation - Kenwood DNX521DAB Instruction Manual

Return to the Top page
Radio, TV
DAB Basic Operation (DNX521DAB, DNX4210DAB only)
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.89).
Control screen
1
2
1 Information display/Control switching area
Displays the following information.
• [DB1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu
3 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu
4 List switching key
Touch to switch between the preset list and the information list.
5 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [DB].
• Tunes in an ensemble: T ouch [4] [¢]. The method of ensemble switching can be changed. See
Multi function menu (P.47).
• Tunes in a ensemble, service, and component:
<<<< >>>>
Touch [ ] [ ]. The method of ensemble, service, and component switching can be changed.
See Multi function menu (P.47).
6 Label infomation
Displays the list of preset service.
Displays the information of the current service: Service Label, PTY Label, Ensemble Label, Audio Quality
46 46
7
6
5
3
4
(P.47).
(P.47).
7 Signal Strength indication
Displays the received signal strength of the DAB station.
Multi function menu
The functions of each key are as follows.
[ ]
Displays the list of preset stations or services. For details, see List select
[P1] - [P5]
Selects the preset ensemble. Touch for 2 seconds to store the current ensemble into the preset
memory.
[DLS]
Touch to display the Dynamic Label Segment screen.
[TI]
Sets the traffic information mode on. For details, see Traffic Information
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a ensemble with good reception automatically.
• AUTO2: Tunes in ensemble in memory one after another.
• MANUAL: S witches to the next ensemble manually.
[PTY]
Searches a program by setting program type. For details, see Search by program type
[ REAR ]
Touch to mute the rear speaker.
[ SETUP]
Touch to display the SETUP Menu screen. See Setting Up
[ AUDIO]
Touch to display the Audio Control screen. See Controlling Audio
Return to the Top page
Radio, TV
(P.52).
(P.53).
(P.53).
(P.70).
(P.82).
47