Using The On-Screen Menus - Runco PlasmaWall PL-50XA Owner's Operating Manual

Operation
4.4
Using the On-Screen
Menus
Press the MENU button on either the remote control or the DHD Controller front panel to
display the Main Menu. To select a menu item, use the UP (
on either the remote control or the DHD Controller front panel to highlight it. Press ENTER
to confirm your selection.
The PlasmaWall OSD menus are arranged hierarchically, as shown in Figure 4-2.
Depending on the selected input source and signal characteristics, some menu options
may not be available.
32 Runco PlasmaWall Owner's Operating Manual
) and DOWN ( ) buttons