Menus For Video Ntsc, Pal Or Digital 480P And Hdtv; Osd Menus - Runco CinemaWall CW-43MC Owner's Operating Manual

MENUS
for Video NTSC, PAL or Digital 480p & HDTV
OSD Menus for Video NTSC, PAL or Digital 480p & HDTV
These menus will appear only when displayed for video.
MAIN MENU
PICTURE SET UP
CONTRAST : 0
BRIGHT. : 0
COLOR : 0
TINT : 0
SHARP : 0
RESET
MAIN MENU
PICTURE SET UP
INPUT LABEL
AUTO POWER OFF : OFF
COLOR TEMP
DIGITAL NR
HIGH CONTRAST
MAIN MENU
PICTURE SET UP
POWER CONTROL: STANDARD
AUTO FUNCTION : OFF
AUDIO OUT
INPUT 4
OPTION
INPUT 4
OPTION
: INPUT 4
: MIDDLE
: LOW
: OFF
INPUT 4
OPTION
: VARIABLE
1. PICTURE Tab
The PICTURE menu allows for adjustment of picture
that are unique per input and stored automatically.
• CONTRAST is used to set the white level.
• BRIGHT. is used to set the black level.
• COLOR is used to set color saturation levels.
• TINT allows for balance between red and green
levels.
• SHARP is used to enhance high frequency
response in the video signal.
Highlight RESET and press SET button for factory
default settings. For current input only.
2. SET UP Tab
The SET UP menu offers adjustments pertaining
to the operation of the plasma:
• INPUT LABEL can be changed to match the
name of the source.
• AUTO POWER OFF shuts-down the plasma when
no source is present.
• COLOR TEMP presets can be chosen - the
presets can be customized in the INSTALLER
ADJUST Menu.
• DIGITAL NR can be set up to enable noise
reduction in the image.
• HIGH CONTRAST mode can be set for a high
contrast image in low-ambient light environments.
Normally set to OFF.
3. OPTION Tab
The OPTION menu has adjustment for the initial
set up of the plasma:
• POWER CONTROL allows for different light out-
puts depending on the situation and environment.
Normally set to standard.
• AUTO FUNCTION automatically selects the high
est quality source.
• AUDIO OUT sets audio output volume to fixed or
variable output.
13