Selecting The Input Source; Setting The Pc Display Properties - Runco PlasmaWall PL-50XA Owner's Operating Manual

Flat panel plasma display monitor with widevision and digital high definitiontm controller with vivix ii technology

Hide thumbs Also See for PlasmaWall PL-50XA:

Table of Contents

Operation

4.2

Selecting the Input

Source

4.3

Setting the PC Display

Properties

By default, the PlasmaWall is configured to display the signal received on its RGBHV

(PC/RGB) input. To use the HDMI (DVD/HD3) input instead:

1. Press MENU and enter the Service Menu passcode.

You must enter a passcode to access the Service menu.

Note

2. Select Service from the Main Menu.

3. Select Display Device from the Service Menu.

4. Press

to select DVI/HDMI, then press ENTER.

To maximize image quality when using the PlasmaWall with a personal computer, you

may need to adjust the display properties of your PC video card. To do this:

1. Choose Settings from the Windows Start

menu and click on "Control Panel."

2. Double click on the Display icon.

3. Click the Settings tab on the display dialog

box.

4. Adjust the resolution to 1024x768 pixels.

Runco PlasmaWall Owner's Operating Manual

Table of Contents