Runco LS-3 Series Installation & Operation Manual page 88

Serial Communications
Table 6-1 lists the serial command key names and IR codes.
Table 6-1. Serial Command Key Names and IR Codes
RS232
Remote Button
Keyname
pow.on
l
src.sw
(none)
pow.off
menu
MENU
enter
ENTER
cur.down
▼
cur.up
▲
cur.left
cur.righ
bright
contrast
sharp
SHARP
nr
NR
resync
(none)
gam.sw
GAMMA
IR Code
Set 1 Set 2
0x01 0xB7 Turn power on.
0x02 0xB8 Switch to the next source.
0x09 0xB9 Turn power off.
0x15 0xBA Bring up or cancel menu display.
0x17 0xBB Keypad enter.
0x18 0xBC Keypad down arrow.
0x1A 0xBD Keypad up arrow.
0x1D 0xBE Keypad left arrow.
0x1F 0xBF Keypad right arrow.
0x80 0xC0 Bring up or cancel brightness slider.
0x81 0xC1 Bring up or cancel contrast slider.
0x82 0xC2 Bring up or cancel sharpness slider.
0x83 0xC3 Bring up or cancel noise reduction slider.
0x84 0xC4 Force reacquisition of active and PIP
source
0x85 0xC5 Switch to the next gamma.
72 Runco LS-3/LS-5 Installation/Operation Manual
Description