Runco Quantum Color Q-650i Series Installation & Operation Manual page 90

Serial Communications
Table 6-1 lists the serial command key names and IR codes.
Table 6-1. Serial Command Key Names and IR Codes
RS232
IR Code
Keyname
0x00 pow.on
0x45 pow.off
0x02 src.video
0x1f src.svid
0x0a src.hdmi1
0x50 src.hdmi2
0x1e src.1
0x40 src.2
0x58 src.3
0x1b info
0x19 menu
0x5c exit
0x51 enter
0x1d cur.down
0x44 cur.up
0x1c cur.left
0x48 cur.righ
0x06 bright
0x05 contrast
Remote Button
Turn power on.
ON
Turn power off.
OFF
Switch the active source to Video.
VID
Switch the active source to S-Video.
S-VID
Switch the active source to HDMI 1.
HDMI 1
Switch the active source to HDMI 2.
HDMI 2
Switch the active source to Component 1.
HD 1
Switch the active source to Component 2.
HD 2
Switch the active source to RGB.
HD 3
Bring up an information box with the first 7 items in
INFO
the Service menu.
Bring up or cancel menu display.
MENU
Exit all menus.
EXIT
Keypad enter. If PIP is active and no menu is
present then this will execute the PIP swap func-
ENTER
tion
Keypad down arrow.
Keypad up arrow.
Keypad left arrow. If no menu is present then this
◄
will change the PIP source.
Keypad right arrow. If no menu is present then this
◄
will change the PIP source.
Bring up or cancel brightness slider.
BRT
Bring up or cancel contrast slider.
CONT
74
Description
Q-650i Series Installation/Operation Manual