Runco XtremeProjection X-450d Installation & Operation Manual page 27

11. DisplayPort
DisplayPort 1.1a and DisplayPort-HDCP 1.1 compliant, SD/HD input for connecting
SDTV, EDTV or HDTV component video sources.
12. HD1 / HD2 In (15-pin VGA)
Two inputs for connecting standard-definition (SD = 480i/576i), enhanced-definition
(ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p) component video
sources, or RGBHV sources such as personal computers.
13. Component / SCART In (3 x RCA connectors)
SD/HD input for connecting SDTV, EDTV or HDTV component video sources. Also
provides RGB input for SCART RGBS sources.
14. Video 1 / Video 2 / Video 3 In
Standard, composite video inputs for connecting a VCR, camcorder or other
composite video source. The Video 1 input also provides composite sync input for
SCART RGBS sources.
15. HDMI 1 ... HDMI 8 In (Digital)
Eight (8), HDCP-compliant digital video inputs for connecting HDMI or DVI sources.
16. Ethernet
A female RJ-45 connector for wired network communications.
17. HDMI Out (Audio Only)
Connect this output to an audio control system to pass through HDMI audio.
The Dimension Digital Controller does not transmit HDMI CEC
Note
control messages from the "HDMI Audio Out" connector.
18. HDMI Out (To Secondary Display)
Connect this to the SECONDARY video input on the projector.
19. HDMI Out (To Primary Display)
Connect this to the PRIMARY video input on the projector.
Runco X-400d/X-450d Installation/Operation Manual 11
System Overview